The super-narrow bezel of the P Series achieves a incredible 5.6mm active-active gap (3.5mm top and left ; 2.1mm bottom and right) to provide the audience with a virtually seamless viewing experience. As screens are close to each other, they bring viewers closer to your message as well.

Designed for large video walls, the P Series supports the array configuration of up to 10x10 displays in OSD setting with a splitter. The feature plus the super-thin bezel is bound to bring your audience a colossal, immersive viewing experience.
The MDA (Multiple Display Administrator) application controls up to 98 displays simultaneously through the local network or serial port; it also monitors the health of displays and coordinates a sequential startup to prevent power surges.

The optional BenQ Color Calibration solution is great for managing a number of displays. It unifies the color profile of every screen for the best aggregated presentation through a central PC without the need to manually adjust each unit. A true time-saver.

DisplayPort is a new standard for digital audio/video transmission. With the whopping 10.8Gbps bandwidth, the DisplayPort keeps your contents attractive, distortion-free in longer distances than conventional DVI and HDMI.

BenQ P Series supports remote administration via the built-in RJ45 Ethernet or the RS232 serial interface. Routine tasks such as OSD settings and firmware upgrades can be performed on the control server to the daisy-chained displays.

This feature allows you to deliver high-quality mirrored contents to different locations, or to build a huge multi-display, single-image video wall through one DVI port on the controller PC without the need for splitters.

In commercial environments where images would stay for hours, image retention becomes a problem on consumer displays. PID panels designed for digital signage prevents the burned-in effect even after an extended period of usage.

The P Series has an amazing average life of 50,000 hours - enough for several years of non-stop service. With the reliable industrial-class performance and sturdy build, the BenQ digital signage displays are in fact more economic then consumer models.

A sensor automatically adjusts screen brightness according to the lighting condition of the surrounding environment. Since the power usage adapts intelligently with the ambient light, the display can reduce energy consumption by 40% to 50%.


The PiP/PbP feature displays contents from two independent video sources simultaneously for more convenience and flexibility. The PiP mode allows the sub picture to be resized or relocated for the best presentation.
The feature enables users to designate up to seven sets of on/off time for P Series displays down to individual video input sources. This not only eliminates the need to switch displays on/off manually, but also cuts power bills with precise agendas.

The panel is capable of displaying 10-bit levels for each primary color, that's 1073.7-million colors in total. This helps producing smooth, rich images with no visible color banding for extremely vivid and effective contents.

To ensure a longer service life, lower maintenance cost and better safety, the P Series has Auto Cooling features built in. The system turns the cooling fan on automatically if the internal temperature reaches a certain level.

Specifications
Panel![]() |
|
LCD Size | 46" |
TV/PID Panel | PID |
Light Source | Direct LED |
Active Area (mm) | 1018.08(H) x 572.67(V) |
Resolution | FHD 1920 x 1080 |
Brightness (typ.)/(min) | 700 nits (typ.) |
Contrast Ratio (typ.) | 4000:1 (typ.) |
Response Time (ms) | 6.5ms (typ.) |
Pixel Pitch | 0.53025 (H) x 0.53025 (W) mm |
Frame Rate | 60Hz |
Viewing Angle | 178 degree (H) / 178 degree (V) |
Color gamut (x% NTSC) | 72% |
Panel Bit (8 or 10) | 10 bit (8bit+FRC), 1073.7M |
Power![]() |
|
Voltage | AC 100~240V, 50/60 Hz |
Maximun (Watt) | <300W |
Standby (Watt) | <0.5W (only VGA wake-up) |
Power Off (Watt) | <0.5W |
Audio![]() |
|
Internal Spk | 12W x 2 |
I/O Connection![]() |
|
Power (AC) Input/Output | Yes/ Yes |
Power Switch | Yes |
VGA Input/Output | O / O (3x3 Daisy Chain) |
DVI Input/Output | O / O (4x4 Daisy Chain) |
HDMI Input/Output | Yes / No |
Composite Video In/Out (BNC) | Yes/ Yes |
Component In (YPbPr, RCA) | RCA |
RS232 Input/Output | Yes/ Yes |
S-Video In/Out | Yes / No |
DisplayPort Input | Yes |
OPS/Option board slot | No |
USB Player (Photo, Video) | No |
RJ45 Port | Yes |
Mechanical![]() |
|
Weight (without packing / with packing) | <25/31kg |
Dimension (WxHxD) | 1023.68x578.27x106.7 mm |
Bezel Width (T/B/L/R) | 3.4/2.0/3.4/2.0mm |
Wall Mounting | 400x400 (4 Holes) |
Feature![]() |
|
Features | ●Image Setting ●Source / Volume Control ●VGA Daisy Chain ●DVI Daisy Chain ●RS232 Control Daisy Chain ●ID Setting ●Sharpness Enhancement ●Proof of Image Retention ●Diming Control (Adaptive Contrast) ●Picture in Picture (PIP) ●Picture by Picture (PBP) ●DVI-HDCP ●HDMI-HDCP ●De-Interlacing / Comb Filter ●10-bit Color Processing ●Build-in Video Wall Support ●Scheduling ●Ambient Light Sensor ●Total Turn-On Time ●Diagnostic DC voltage (12v/5v) ●Internal Temperature Sensor ●CEC Control |
Environment![]() |
|
Operation Temp (dC) | 0°C ~ 40°C |
Storage Temp (dC) | -20°C ~ 60°C |
Usage (hrs/days) | 24 hours / 7 days |
Package/Accessory![]() |
|
Remote Controller | Yes |
PWR Cord (by region) | Yes |
VGA Cable | Yes |
Quick Start Guide | Yes |
User’s Manual Electronic File | Yes |
Stand | No (optional, on VESA mount) |