296W Projector Power Consumption by Average
Have a Question? We can helpCALL 1-888-920-2367
Offering Lower TCO and Optimized Projection Through Dynamic Power Saving Uncompromised brightness, exquisite picture quality and optimized lamp life – BenQ’s SmartEco technology has perfected what a DLP projector can do for energy savings. With this special innovation, the MX520 brings together uncompromised brightness, exquisite picture quality and optimized lamp life through innovative features.
The SmartEco Mode, which cleverly adjusts the lamp power to maximize power saving by delivering the best contrast and brightness performance using only as much light as needed.
296W Projector Power Consumption by Average
Smart Eco Mode
Enhanced Details in Darkened Scenes
163W Projector Power Consumption by Average
(Source: 2010 Philips white paper)
The Eco Blank mode allows the presenter to blank the projection screen whenever they need to direct the focus back on them – or simply when the projector is not in use. When activated, this special feature dims the lamp power automatically, lowering the total power consumption by 70%.
Full Power On
100% Lamp Power
Attention on the Projection Screen
Eco Blank Mode On
30% Lamp Power at the Lowest
Attention on the Presenter
The automatic switch to Eco Blank Mode after the projector is turned on for over three minutes without a display source, eliminating unnecessary energy waste and prolonging the life of the projector lamp.
100% Lamp Power
No Source Detected
30% Lamp Power
When inactive, the MX520 keeps power consumption to a minimum with <0.5W standby power, achieving what was once a challenge for earlier projector models. This technological advancement in energy saving certainly helps extend the projector lamp life and lower energy costs.
The MX520 offers an optimized lamp life of up to 6500 hours*, which is twice the lamp life expectancy of an average projector lamp. This helps lower the number of lamp changes and keep maintenance to a minimum.
*Lamp life results will vary depending on environmental conditions and usage.
Featuring a filter-free design, the MX520 requires no filter cleaning or filter replacements, which virtually reduces the labor cost as well as the budget for filter maintenance.
BenQ projectors are standard-equipped with DLP Link™-supported 3D projection to offer the same amazing 3D effects seen in 3D movies. The 3D formats supported by the MX520 are 3D field-sequential, 3D frame packing, 3D top-and-bottom and 3D side-by-side. Furthermore, this incredible projector can be connected to a Blu-ray DVD player for even more stunning visual quality.
Cooling time itself has been reduced by over 60%, saving your time and minimizing the risk of heat damage to sensitive internal components.
The Auto Power Off feature allows the projector to turn off automatically if no input signal is detected after a set period of time so no power is wasted.
The Signal Power On feature turns on your projector automatically once input signal is detected for added convenience.
This convenient feature turns on the projector wheneverit is connected to a power source, saving teachers time and hassle.
The Instant Restart feature gives teachers a 90-second window period to turn the projector back on immediately when it has been switched off by accident – no waiting necessary.
ecoFACTS can tell you how eco-friendly BenQ products are!
Development of eco-friendly products, BenQ doesn't just want to comply with green regulations passively, but also to actively develop eco-friendly products!
ecoFACTS declares BenQ's greatest efforts on the replacement of hazardous substances, material selection, packaging design, energy-saving design and other aspects of the products.
|Native Resolution||XGA(1024 x 768)|
|Brightness*||3000 ANSI lumens|
|Display Color||1.07 Billion Colors|
|Aspect Ratio||Native 4:3 (5 aspect ratio selectable)|
|Throw Ratio||1.86 - 2.04 (53”@2m)|
|Image Size (Diagonal)||40”-300”|
|Lamp (Normal/Economic Mode)*||4500/6000/6500 hours|
|Keystone Adjustment||1D, Vertical +/- 40 degrees|
|Resolution Support||VGA(640 x 480) to UXGA(1600 x 1200)|
|Vertical Scan Rate||23~120Hz|
|Interface||Computer in (D-sub 15pin) x 2(Share with component)
Monitor out (D-sub 15pin) x 1
Composite Video in (RCA) x 1
S-Video in (Mini DIN 4pin) x 1
Audio in (Mini Jack) x 2
Audio in (L/R) x1
Audio out (Mini Jack) x 1
Speaker 2W x 1
USB (Type mini B) x1 (Download & page/down)
RS232 (DB-9pin) x 1
IR Receiver x1 (Front)
|Dimensions(W x H x D)||11.31"x4.5"x9.15" (287.3x114.4x 232.6 mm)|
|HDTV Compatibility||480i, 480p, 576i, 576p, 720p, 1080i, 1080p|
|Video Compatibility||NTSC, PAL, SECAM|
|Audible Noise||33/28 dBA (Normal/Economic mode)|
|Power Supply||AC 100 to 240 V, 50/60 Hz|
|Power Consumption||293W(typical), Standby<0.5W|
|On-Screen Display Languages||English/ France/ Germany/ Italian/ Spanish/ Russian/ Traditional Chinese/ Simplified Chinese/ Japanese/ Korean/ Swedish/ Dutch/ Turkish/ Czech/ Portuguese/ Thai/ Polish/ Hungarian/ Croatian/ Romanian/ Norwegian/ Danish/ Bulgaria/ Finnish/ Indonesian/ Greek/ Hindi/ Arabic (28 Languages)|
|Picture Modes||Dynamic/Presentation/sRGB/Cinema/User 1/User 2|
|Accessories (Standard)||Remote Control w/ Battery
Power Cord (by region)
User Manual CD
Quick Start Guide
Warranty Card (by region)
VGA(D-sub 15pin) Cable
|Accessories (Optional)||Spare Lamp Kit- P/N:5J.J6V05.001
Ceilling Mount- P/N:5J.J4N10.001
3D Glasses- P/N:5J.J7K25.001
Carry bag- P/N: 5J.J3T09.001
|3D Support and Compatibility||Various 3D format supported.|
BENQ AMERICA CORP. END USER LIMITED WARRANTY
Subject to the terms and conditions set forth below, BenQ America Corp. (“BenQ”)
warrants the BenQ Digital Projector (“Product”) you have purchased from BenQ
authorized reseller in the United States on or after May 1, 2010 to be free from defects in
materials or workmanship under normal consumer use during the warranty period in the
continental United States, Hawaii, and Alaska. If the Product becomes defective during
the warranty period BenQ will, at its option, repair or replace the Product. BenQ may use
new or reconditioned components or parts to repair the Product, or replace the Product
with a new or reconditioned Product of the same or functionally equivalent model.
BenQ Projector Standard Limited Warranty: Subject to the exclusions set forth
One (1) year from the purchase date by the original retail purchaser (the “Customer”)
(except for lamps as specified below and refurbished units which have a separate
warranty policy), parts and labor only (No advance replacement).
Lamp Warranty: Lamp is guaranteed 1 year or 2000 hours from the purchase date
by the Customer, whichever comes first.
Return Merchandise Authorization Shipping: The Customer will pay shipping
freight to BenQ or a BenQ Authorized Service Provider and BenQ will pay shipping
freight to the Customer during the warranty period.
DOA (Dead On Arrival): Must be reported within thirty (30) days of purchase. An
RMA number must be issued in order to process the replacement. BenQ will replace
the DOA unit with a brand new replacement. BenQ will cover the freight charges
Shipping Damages: All shipping damages must be reported within seven (7)
business days upon receipt of the Product. BenQ is not responsible for the shipping
damages reported after such period.
Repaired or Replaced Parts and Products: All repaired or replaced parts or
products shall be warranted only for the remainder of the original warranty period
Obtaining Depot Warranty Service
If you purchased a BenQ product in the continental United States, Hawaii, and Alaska,
you are entitled to depot repair service during the warranty period subject to the
following terms and conditions:1. Depot warranty service is available for all Products purchased and located in the
continental United States, Hawaii, and Alaska.
2. You must contact BenQ Technical Support Center at 1-866-600-2367.
3. BenQ or BenQ Technical Support Center will attempt to resolve technical issues over
the phone. If telephone resolution is not possible, BenQ or BenQ Customer Service
Center will then issue a Return Merchandise Authorization (“RMA”) number to be used
as a means of identifying the product returned. RMA authorization numbers are valid for
thirty (30) days and void thereafter
4. You must return the product to BenQ unless otherwise directed by BenQ to a BenQ
Authorized Service Provider. You must prepay any shipping charges, export taxes,
custom duties and taxes, or any charges associated with transportation of the BenQ
product. In addition, you are responsible for insuring any Product shipped or returned and
assume the risk of lost packages.
5. All returned Products must be accompanied with (i) the original shipping and packing
materials, (ii) a description of the BenQ product symptom and (iii) proof of the place and
date of purchase. The RMA number must be clearly printed on packing slip and on the
exterior-shipping container. All Products must be sent in secured packaging to avoid any
6. BenQ and BenQ Authorized Service Provider reserve the right to refuse and return,
freight collect, Products (i) that are not covered by BenQ’s warranty; or (ii) for which
there is no trouble found. Products delivered to BenQ or a BenQ Authorized Service
Provider with an expired RMA may be refused and returned, without prior notice, to the
Customer freight collect.
7. BenQ or BenQ Authorized Service Provider will use its best efforts to service Products
within thirty (30) days after receipt of the Products at its warehouse facilities. For return
shipments of the Products, except otherwise described herein, BenQ or BenQ Authorized
Service Provider will pay the shipping cost and retain risk of loss until delivery to the
Customer’s location as evidenced by signature collected by carrier. The Customer may
designate only one location within the continental United States, Hawaii, and Alaska for
return shipments. BenQ and BenQ Authorized Service Provider are not responsible for
shipping or other delays beyond their control.
This limited warranty does not extend to any Product not purchased from the BenQ
authorized reseller. This limited warranty also does not extend to any product that has
been damaged or rendered defective (a) due to normal wear and tear; (b) as a result of use
of the Product other than for its normal intended use, or other misuse, abuse or
negligence to the Product; (c) by the use of parts not manufactured or sold by BenQ; (d)
by modification of the Product; (e) as a result of service by anyone other than BenQ or a
BenQ Authorized Service Provider; (f) improper transportation or packing when
returning the Product to BenQ or a BenQ Authorized Service Provider; (g) improper installation of third-party products; (h) improper environment (including improper
temperature or humidity); (i) unusual physical or electrical stress or interference, failure
or fluctuation of electrical power, lightning, static electricity, fire, or acts of God. BenQ is
not responsible for damage to or loss of any programs, data or removable storage media.
You are responsible for saving (backing up) any programs, data or removable storage
EXCEPT FOR THE WARRANTIES SET FORTH HEREIN, BenQ DISCLAIMS ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED OR STATUTORY,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ANY
IMPLIED WARRANTIES THAT MAY BE IMPOSED BY APPLICABLE LAW ARE
LIMITED TO THE TERMS OF THIS LIMITED WARRANTY. IN NO EVENT
SHALL BenQ BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, INCLUDING BUT NOT LIMITED
TO LOSS OF BUSINESS, REVENUE, PROFITS, INFORMATION, DATA OR USE,
WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A
WARRANTY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THE PRODUCT, EVEN IF BenQ HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. YOU AGREE THAT REPAIR OR
REPLACEMENT, AS APPLICABLE, UNDER THE WARRANTY SERVICES
DESCRIBED HEREIN IS YOUR SOLE AND EXCLUSIVE REMEDY WITH
RESPECT TO ANY BREACH OF THE BenQ LIMITED WARRANTY SET FORTH
HEREIN. IF, DESPITE THE FOREGOING LIMITATIONS, FOR ANY REASON
BenQ BECOMES LIABLE TO YOU FOR DAMAGES INCURRED BY YOU IN
CONNECTION WITH THIS AGREEMENT, THEN, THE LIABILITY OF BenQ WILL
BE LIMITED TO THE AMOUNT EQUAL TO THE INVOICE AMOUNT PAID BY
YOU TO BenQ OR A BenQ AUTHORIZED RESELLER FOR THE PRODUCT.
All prices, products, terms and conditions are subject to change without notice. Some
states or provinces/jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages for consumer products, and some states or provinces/jurisdictions
do not allow limitations on how long an implied warranty lasts. In such states or
provinces/jurisdictions, the exclusions or limitations of this limited warranty may not
apply to you. This limited warranty gives you specific legal rights. You may also have
other rights that vary from state to state/jurisdiction to jurisdiction. You are advised to
consult applicable state and provincial/local laws for a full determination of your rights.
Please call Technical Support Center to report a defective product.
Hours: M-F 8:30am – 5:30pm PST
To avoid delays, please DO NOT SEND ANY BenQ product to BenQ or BenQ
Authorized Service Provider without BenQ’s authorization.